In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges puppy dog mask so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are flat and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you will need to do some sanding to make sure that it’s secure on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.